Users of the Precor Discovery Series Selectorized Line Inner Thigh appreciate facing the shrouded weight stack for privacy as well as the easy-to-operate adjustable start position. The seat back is slightly reclined for comfort and stabilization.
Equipment Features
| Weight Stack | Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. |
| Upholstery | Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. |
| Adjustable Seat | Yes, gas-assisted ratcheting seat adjustment |
| Adjustments | Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use. |
| Instructional Placard | Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app. |
| Bearings and Pivot Points | Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. |
| Water Bottle and Accessories Holder | The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean. |
| Pulleys and Cables | Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference. |
| Frame and Finish | The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat. |
| Bolt Down Capability | Yes |
| General Features | Easy-to-operate adjustable start position. User faces fully shrouded weight stack for privacy. Slightly reclined back position for comfort and stabilization. |
Equipment Specifications
| Incremental Add-on Weight | 5 lb (2.3 kg) |
| Standard Shroud Color | Pacific Blue Dark Cavern Black |
| Weight Stack | 200 lbs / 91 kg |
| Standard Upholstery Colors | Black Imperial Blue Royal Blue American Beauty Red Graphite Slate Mahogany Paprika Terra Cotta |
| Standard Frame Colors | Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White |
| Workout Area (L x W) | 66 L x 55 W inches / 168 L x 139 W cm |
Equipment Dimensions and Weight
| Length | 66 inches / 168 cm |
| Width | 30 inches / 76 cm |
| Height | 59 inches / 150 cm |
| Equipment Weight | 544 lbs / 247 kg |
Shipping Dimensions and Weight
| Shipping Weight | 595 lbs / 270 kg |
Regulatory
| EN957 | Yes |
| ASTM | Yes |
