The Spinner® Chrono™ Power distances itself from the pack of indoor cycles that measure power by offering a hassle-free experience for operators, instructors and riders alike, all while staying true to the iconic feel of a Spinner® bike. With direct power measurement, patent-pending magnetic resistance, and the brightest console back light in the industry — with no batteries to change — the Spinner Chrono Power bike will exceed expectations.
It’s all about Watts and direct power measurement
We raised the bar on accuracy and reliability by putting the strain gauge power sensor directly on the resistance system. The sensor is protected from shoes and sweat, and directly wired to the console to eliminate wireless pairing, manual calibration or the need for batteries.
Patent-pending magnetic resistance system
The unique calliper design of the resistance mechanism specifically accommodates the heavy perimeter-weighted flywheel that delivers the iconic Spinner® feel. Every turn of the knob delivers an equal increase without sudden jumps in resistance.
Ultra-bright LCD color console
Say goodbye to batteries. The on-board generator not only drives the power measurement sensor, but also the always-on ultra-bright console backlight, and keeps the console on for three minutes after you stop pedaling. The console is Bluetooth® compatible to share data with a smartphone and ANT+ compatible for heart rate straps and leaderboard pairing.
|Kevlar® reinforced cogged belt
|Semi-gloss metallic black
|Adjustable Fore-Aft & Up-Down
|Dual sided, SPD compatible
|Fore-Aft & Up-Down
|Spinner® Power LCD color Console (included)
|Watts, Average Watts, Kilojoules or Calories, Cadence (RPM), Average Cadence, Heart Rate (BPM), Average Heart Rate, Time, and Distance. Up to ten intervals with each including interval time, interval kilojoule, interval average watts.
|No batteries required
|The console is Bluetooth compatible to share data with a smartphone. Smartphone must first have a compatible app installed such as Wahoo RunFit.
|Compatible for pairing with heart rate straps, leaderboards, and personal devices with FE-C “Trainer” protocol.
|Can receive software updates via UBS, can upload service log data to a USB
|User Height Range
|4′ 11″ to 6′ 4″ / 150 cm to 193 cm
|Maximum User Weight
|350 lb / 159 kg
Equipment Dimensions and Weight
|48 in / 122 cm
|20.4 in / 52 cm
|110 lb / 50 kg
Shipping Dimensions and Weight
|47 in / 119 cm
|11 in / 27.94 cm
|39 in / 99.06 cm
|147 lb / 66.68 kg
Heart Rate Monitoring
|Heart Rate Sensor Advisory
|The heart rate features are intended for reference only. They may not be accurate for every user or at every speed and are not intended for use as a medical device. Holding the heart rate handle touch sensor while exercising at higher intensity may also decrease accuracy of the heart rate reading and is not recommended.
Individual Product Manuals are being added daily to our Fitness Equipment Manuals page.
If you need one and don’t see it there send a request to email@example.com
*All deliveries are done to curbside only. We do not/cannot bring items inside a home or business.
Assembly Required: Hand tools and the ability to follow printed instructions is all that is required here.
Boxed: Only partially dis-assembled to keep the shipping cost down.
Fully Assembled & Crated: Ready to use condition once the crate has been removed.
New equipment is just like it sounds: brand new equipment shipped to you.
Demo is equipment is just that: equipment with the very lightest usage as a demonstrator model.
Below is our general refurbishing and remanufacturing process for our commercial-grade fitness equipment:
- All Overlays Replaced
- All Electronic Sensors Replaced
- All Wearable Moving Parts Replaced Regardless of Condition
- New Running Belt & Motor Drive Belt On Treadmills
- Belts Replaced
- Decks Replaced
- Frames Repainted
- Roller Bearings Replaced
- Bushings Replaced
- Motors Rebuilt
- All Grips Replaced
- Decals Replaced
- Shrouds Replaced if Cracked
- All Electronic and Machine Functions tested twice before shipping
Primo Fitness has been refurbishing and remanufacturing used fitness gym equipment for over 20 years. We only used the highest quality replacement parts and our refurbished or remanufactured machines are like new again when they leave our shop. Here is a video about what everyone should know before purchasing refurbished or remanufactured fitness equipment.
Serviced and Cleaned (for indoor bikes only)
- We open the machine and break it down
- We then search for worn or broken parts
- The parts are then replaced
- Cosmetic touch up is done
- All functions are tested twice
Serviced & Cleaned is great for light commercial or home gyms, with 2 to 3 hrs. of use per day.
We offer a 30 Day Parts warranty on Serviced & Cleaned, after that, if a part does need to be replaced, they are very inexpensive and easy to replace. We are available for phone consultation if you have any questions.